Descripción
AUDIOPHONY TI-500 – Amplificador 2 x 130w 4-8 ohms
Características Principales
Ti500
Volume and power output in stereo mode
8 Ohms 2 x 130 W RMS
4 Ohms minimum 2 x 250 W RMS
Volume and power output in mono-bridged mode
8 Ohms minimum 1 x 500 W RMS
Signal-to-Noise ratio Lower than 90 dB
Input sensitivity 4 dBu +/-2dB
Distortion
At 1KHz and 1/2 max. power Lower than 0,1%
Crosstalk at full power – 65 dB at 1 KHz
Frequency response (4 Ohms / 1W) +0,5dB ; 20Hz-20KHz
Input impedance Unbalanced: 15 KOhms / Balanced: 30 KOhms
Clip level 0dB
Cooling system Convection
Connectors
Input Balanced XLR and Jack TRS + Unbalanced RCA
Output Screw terminal + 4-pole Speakon®
Settings
Front panel Power switch / Channels 1 and 2 settings
Rear panel Mode selector
Indicators Protect (red) / Clip (yellow) / Signal (green)
Protections Short-circuit / Current limiter / DC offset / Thermal
Power supply 100Vac/230Vac – 50/60Hz
Dimensions 482 mm x 44 mm x 330 mm
Net weight 4,3 Kg 4,7 Kg
PÁGINA OFICIAL: AUDIOPHONY
DOCUMENTOS ASOCIADOS
Ficha Técnica / Manual AUDIOPHONY TI-500
